本文我们主要和大家分享linux如何安装php，本文以图文的形式和大家分享，希望能帮助到大家。
1.从php官网下载相应的版本
因为php下载页面只有最近的几个版本，下载比较老的版本在下载页面已经找不到了，只能手动通过下面的url来下载，
http://cn.php.net/distributions/php-5.3.9.tar.bz2，此页面里会列出一些老的版本，此处使用的是5.3版本，下载的是gz格式的
2.安装php
将tar包解压，进入解压包目录-执行命令：./configure --prefix=/opt/local/php ，“/opt/local/php”是安装路径，可以改成自己希望的安装路径。
（1）此处可能会提示缺少一些必须的插件，此时利用yum命令进行安装，比如最可能报的错误：configure error xml2-config not found. please check your libxml2 installation，此时执行命令：yum -y install libxml2 libxml2-devel，安装相应插件，以此类推
所有插件安装完成后，再次执行
<span style="font-size: 14px;">./configure --prefix=/opt/local/php<br/></span>
（2）此处如果是要安装php-fpm的功能的话需要yum安装更多插件，例如：
<span style="font-size: 14px;">yum -y install openssl openssl-devel bzip2 bzip2-devel curl curl-devel readline-devel fcgi php-mcrypt libmcrypt libmcrypt-devel<br/></span>
其中安装php-mcrypt
libmcrypt libmcrypt-devel时可能会提示找不到包，这时要通过更新源解决，具体命令如下：
<span style="font-size: 14px;">yum -y install epel-release<br/>yum update<br/></span>
其中，update执行了两次才成功，之后再执行configure
./configure --prefix=/opt/local/php5.3.29 --with-config-file-path=/etc --enable-inline-optimization --disable-debug --disable-rpath --enable-shared --enable-opcache --enable-fpm --with-fpm-user=www --with-fpm-group=www --with-mysql=mysqlnd --with-mysqli=mysqlnd --with-pdo-mysql=mysqlnd --with-gettext --enable-mbstring --with-iconv --with-mcrypt --with-mhash --with-openssl --enable-bcmath --enable-soap --with-libxml-dir --enable-pcntl --enable-shmop --enable-sysvmsg --enable-sysvsem --enable-sysvshm --enable-sockets --with-curl --with-zlib --enable-zip --with-bz2 --with-readline --without-sqlite3 --without-pdo-sqlite --with-pear
通过后执行make
此时可能会出现以下提示
PEAR package PHP_Archive not installed: generated phar will require PHP's phar extension be enabled.
此处可暂进忽略，等之后再行安装，再次在php目录执行make all install
如果安装了php-fpm，则还需要执行以下命令，将php/etc目录下的配置文件拷贝一份
cp etc/php-fpm.conf.default etc/php-fpm.conf
将php/lib/php.ini拷贝到/etc/下
3.初装phar
这时可以执行
<span style="font-size: 14px;">wget http://pear.php.net/go-pear.phar<br/></span>
之后再执行
/opt/local/php/bin/php /opt/local/go-pear.phar
在出现的提示后，选1，选择phar安装目录，然后一路回车进行安装即可
最后制作php软链，让php全局可用
<span style="font-size: 14px;">ln -s /opt/local/php/bin/php /usr/bin/php<br/></span>
4.验证
执行php -v和sbin/php-fpm -v查看php版本以验证php是否已安装
5.启动php-fpm
立即学习“PHP免费学习笔记（深入）”；
php/sbin/php-fpm
INT, TERM 立刻终止
QUIT 平滑终止
USR1 重新打开日志文件
USR2 平滑重载所有worker进程并重新载入配置和二进制模块
示例：
php-fpm 关闭：
kill -INT `cat /opt/local/php/var/run/php-fpm.pid`
php-fpm 重启：
kill -USR2 `cat /opt/local/php/var/run/php-fpm.pid`
如果找不到php-fpm.pid文件，可通过查找php-fpm进程号进行重启和关闭
例如
<span style="font-size: 14px;">[root@SH-DEV local]# ps -aux|grep php-fpm<br/>root 141735 0.0 0.0 201840 3892 ? <br/> Ss 16:27 0:00 php-fpm: master process (/opt/local/php5.3.29/etc/php-fpm.conf)<br/><br/>kill -USR2 141735<br/></span>
6.修改php-fpm配置
（1）如果在nginx.conf中使用了fastcgi_pass unix:/tmp/php-cgi.sock，则需要修改php-fpm.conf，找到如下码段：
<span style="font-size: 14px;">; The address on which to accept FastCGI requests.<br/>; Valid syntaxes are:<br/>; 'ip.add.re.ss:port' - to listen on a TCP socket to a specific address on<br/>; a specific port;<br/>; 'port' - to listen on a TCP socket to all addresses on a<br/>; specific port;<br/>; '/path/to/unix/socket' - to listen on a unix socket.<br/>; Note: This value is mandatory.<br/>;listen = 127.0.0.1:9000<br/>listen = /tmp/php-cgi.sock<br/><br/>; Set listen(2) backlog. A value of '-1' means unlimited.<br/>; Default Value: 128 (-1 on FreeBSD and OpenBSD)<br/>;listen.backlog = -1<br/><br/>; Set permissions for unix socket, if one is used. In Linux, read/write<br/>; permissions must be set in order to allow connections from a web server. Many<br/>; BSD-derived systems allow connections regardless of permissions.<br/>; Default Values: user and group are set as the running user<br/>; mode is set to 0660<br/>listen.owner = nobody<br/>listen.group = nobody<br/>listen.mode = 0660<br/></span>
将原listen和listen.owner，listen.group段做如上修改，其中listen.owner，listen.group为nginx启动用户名，如此处不修改，会提示
nginx error connect to php-fpm.sock failed (13: Permission denied)
当然此处如果将sock放在内存中/dev/shm/php-fpm.sock会更快
（2）修改php-fpm线程数
<span style="font-size: 14px;">; Per pool prefix<br/>; It only applies on the following directives:<br/>; - 'slowlog'<br/>; - 'listen' (unixsocket)<br/>; - 'chroot'<br/>; - 'chdir'<br/>; - 'php_values'<br/>; - 'php_admin_values'<br/>; dynamic - the number of child processes are set dynamically based on the<br/>; following directives. With this process management, there will be<br/>; always at least 1 children.<br/>; pm.max_children - the maximum number of children that can<br/>; be alive at the same time.<br/>; pm.start_servers - the number of children created on startup.<br/>; pm.min_spare_servers - the minimum number of children in 'idle'<br/>; state (waiting to process). If the number<br/>; of 'idle' processes is less than this<br/>; number then some children will be created.<br/>; pm.max_spare_servers - the maximum number of children in 'idle'<br/>; state (waiting to process). If the number<br/>; of 'idle' processes is greater than this<br/>; number then some children will be killed.<br/>; ondemand - no children are created at startup. Children will be forked when<br/>; new requests will connect. The following parameter are used:<br/>; pm.max_children - the maximum number of children that<br/>; can be alive at the same time.<br/>; pm.process_idle_timeout - The number of seconds after which<br/>; an idle process will be killed.<br/>; Note: This value is mandatory.<br/>pm = dynamic<br/>#如何控制子进程，选项有static和dynamic。如果选择static，则由pm.max_children指定固定的子进程数。如果选择dynamic，则由下面的参数决定<br/><br/>; The number of child processes to be created when pm is set to 'static' and the<br/>; maximum number of child processes when pm is set to 'dynamic' or 'ondemand'.<br/>; This value sets the limit on the number of simultaneous requests that will be<br/>; served. Equivalent to the ApacheMaxClients directive with mpm_prefork.<br/>; Equivalent to the PHP_FCGI_CHILDREN environment variable in the original PHP<br/>; CGI. The below defaults are based on a server without much resources. Don't<br/>; forget to tweak pm.* to fit your needs.<br/>; Note: Used when pm is set to 'static', 'dynamic' or 'ondemand'<br/>; Note: This value is mandatory.<br/>pm.max_children = 8<br/>#子进程最大数<br/><br/>; The number of child processes created on startup.<br/>; Note: Used only when pm is set to 'dynamic'<br/>; Default Value: min_spare_servers + (max_spare_servers - min_spare_servers) / 2<br/>pm.start_servers = 8<br/>#启动时的进程数<br/><br/><br/>; The desired minimum number of idle server processes.<br/>; Note: Used only when pm is set to 'dynamic'<br/>; Note: Mandatory when pm is set to 'dynamic'<br/>pm.min_spare_servers = 1<br/>#保证空闲进程数最小值，如果空闲进程小于此值，则创建新的子进程<br/><br/>; The desired maximum number of idle server processes.<br/>; Note: Used only when pm is set to 'dynamic'<br/>; Note: Mandatory when pm is set to 'dynamic'<br/>pm.max_spare_servers = 8<br/>#保证空闲进程数最大值，如果空闲进程大于此值，此进行清理<br/></span>
相关推荐：
